ZMDI ZSSC3170汽车传感器信号调理方案

分享到:

ZMDI公司的ZSSC3170是集成了LIN和PWM接口的汽车传感器信号调理器,最大模拟增益420,并具有扩展的失调补偿.器件和LIN指标1.3 / 2.0 / 2.1兼容,数据转换速率高达430Hz,电源电压7-18V,ADC分辨率13-14位,输出分辨率达12位,睡眠模式的电流消耗小于100uA.本文介绍了ZSSC3170主要特性, 方框图和多种应用电路.

ZSSC3170: Automotive Sensor Signal Conditioner with LIN and PWM Interface

The ZSSC3170 is a CMOS integrated circuit for highly accurate amplification and sensor specific correction of bridge sensor signals. Featuring a maximum analog gain of 420, as well as extended offset compensation capabilities, the ZSSC3170 is adjustable to nearly all resistive bridge sensor types.

Digital compensation of offset, sensitivity, temperature drift, and nonlinearity is accomplished via a 16-bit RISC microcontroller. Conditioning coefficients are stored in an EEPROM certified for automotive applications.

Measured values are provided by one of the digital LIN or PWM interfaces. Each interface can support end-of-line calibration using the sensor output. Noise sensitivity is greatly reduced because the calibration equipment and the ZSSC3170 are mated digitally.

For quick and easy evaluation and support for calibrating prototypes, ZMDI offers the ZSSC3170 SSC Evaluation Kit, which includes evaluation hard-ware, SSOP20 samples, and software.

ZSSC3170主要特性:

Complies with LIN specifications 1.3/2.0/2.1

Configurable LIN publisher frame content

Data conversion rate of up to 430Hz fully utilizes the maximum LIN channel capacity of 20kbit/s

PWM high-side and low-side switches, support for LIN communication for end-of-line calibration

Digital compensation of offset, gain, temperature effects up to 2nd order, and nonlinearity up to 3rd order. Compensation of temperature sensor offset, gain, and nonlinearity up to 2nd order.

Internal or external temperature reference

Media temperature sensing by diode or RTD

Load dump protection of the LIN pin up to ±40V

Operating temperature range: -40 to 125Â℃

Extended operating temperature range: ≤150Â℃

Accuracy

±0.25% FSO @ -20 to 85Â℃

±0.50% FSO @ -40 to 125Â℃

±1.00% FSO @ -40 to 150Â℃

3 EEPROM words available for optional use data

ZSSC3170优势:

Measurand and temperature signal available via one output pin

Compatible with nearly all resistive bridge inputs

No external trimming components required

Single-pass calibration minimizes calibration costs

End-of-line calibration using sensor output

Optimized for automotive environments with special protection circuitry, excellent electro-magnetic compatibility, and numerous diagnostic features

ZSSC3170物理特性:

Supply voltage: 7 to 18V

Current consumption in Sleep Mode: ≤ 100μA Input span: 1.8 to 267 mV/V

ADC resolution: 13 to 14 bit

Output resolution: up to 12-b

Package: SSOP20 or die


图1.ZSSC3170方框图

图2.ZSSC3170 LIN压力传感器和温度传感器

图3.ZSSC3170低边开关PWM模式应用电路图

图4.ZSSC3170高边开关PWM模式应用电路图

图5.ZSSC3170LIN模式应用电路图
 

继续阅读
MAPS - K22教程:KSDK2.0+KDS3.0实现PWM

在Kinetis K22 MCU中的TPM模块可实现PWM波形,可以控制比如最近活动的小车电机调速等。这次使用MAPS-K22套件测试一下KSDK2.0的PWM波形的产生,为了查看效果方便,查了一下电路,发现LD3接在PTB1上面,而PTB1是TPM1的CH1通道,正好就那这个做下实验吧。

MAPS四色板体验(二)

实验一 实验目标:利用板载电位器控制LED的亮度变化。 实验原理: (1)FTM(弹性定时器模块)是一个支持输入捕捉、输出比较、产生可用来控制电机的PWM信号和电源管理应用的通道定时器。 每一个通道都可配置为输入捕捉、输出比较或者边缘对齐的PWM模式。 (2)K60的ADC模块支持差分模拟输入和单端输入模式。其中单端支持16位、12位、10位以及8位模式。

MAPS四色板系列K64学习笔记——配置ADC和PWM

第一次接触四色板,飞思卡尔FAE在ECBC授课完以后,正式开始学习K64了。今天跟大家分享的是关于K64的ADC模块和PWM模块的一些配置问题。

低功耗汽车网络参考设计方案——飞思卡尔TRK-KEA128开发板评测+视频

前些天,陪一个朋友去选车,无意中听到4S店的一个销售不停抱怨,“如今的买家太难搞了,太挑剔、又不容易被忽悠,像在以前买车基本就是看看外观,看看空间,再不济,坐上去溜一圈就可以决定买不买了;如今呢,除了要具备以上的这些条件,人们也愈发的重视车载的娱乐功能、使用操作的易用、稳定性、安全性如何等等...”

掌握MCU软件设计准则 实现直流马达控制精准度提升

300瓦以下的小功率马达适合以MCU做为控制方案,在各家MCU硬件规格差异化日渐缩小之下,软件演算设计就显得相形重要,若能掌握MCU控制各种直流马达的软件设计原则,将能大幅提升马达控制的精准度。