Atmel ATA6843 汽车BLDC马达驱动解决方案

分享到:

Atmel公司的 ATA6843和ATA6844是三相无刷直流马达( BLDC)控制器,集成了微控制器和六个分立的功率MOSFET,并提供3.3V/5V线性稳压器和窗口看门狗,为汽车应用提供了完整的BLDC马达控制单员。工作电压5.25V到32V,工作结温150度C,能以最大开关频率50kHz直接驱动6个外接NMOS晶体管。本文介绍了ATA6843和ATA6844主要特性,方框图和典型应用电路及所用外接元件列表。

BLDC Motor Driver and LIN System Basis Chip

The Atmel® ATA6843 and Atmel ATA6844 are system basis chips for three-phase brushless DC motor controllers designed in Atmel’s state-of-the-art 0.8μm SOI technology SMART-I.S.™1. In combination with a microcontroller and six discrete power MOSFETs, the system basis chip forms a BLDC motor control unit for automotive applications. In addition, the circuits provide a 3.3V/5V linear regulator and a window watchdog.

The circuit includes various control and protection functions like overvoltage and overtemperature protection, short circuit detection, and undervoltage management. Thanks to these function blocks, the driver fulfils a maximum of safety requirements and offers a high integration level to save cost and space in various applications. The target applications are most suitable for the automotive market due to the robust technology and the high qualification level. Atmel ATA6844, in particular, is designed for applications in a high-temperature environment.

ATA6843和ATA6844主要特性:

• Broad Operation Voltage Range from 5.25V to 32V

• Atmel ATA6843 Temperature Range TJ = 150℃

• Atmel ATA6844 Extended Temperature Range TJ = 200℃

• Direct Driving of 6 External NMOS Transistors with a Maximum Switching Frequency of 50kHz

• Integrated Charge Pump to Provide Gate Voltages for High-side Drivers and to Supply the Gate of the External Battery Reverse Protection NMOS

• Built-in 5V/3.3V Voltage Regulator with Current Limitation

• Reset Signal for the Microcontroller

• Sleep Mode with Supply Current of typically < 45μA

• Wake-up via LIN Bus or High Voltage Input

• Programmable Window Watchdog

• Battery Overvoltage Protection and Battery Undervoltage Management

• Overtemperature Warning and Protection (Shutdown)

• Jump Start Compatible

• 200mA Peak Current for Each Output Driver

• LIN Transceiver Conformal to LIN 2.1 and SAEJ2602-2 with Outstanding EMC and ESD Performance

• QFN48 Package 7mmx7mm


图1。ATA6843和ATA6844方框图

图2。ATA6843和ATA6844典型应用电路图

应用电路中外接元件表:

继续阅读
半导体行业发展的一个潜力股,氧化镓技术应用前景巨大

半导体世界可能会有一个新的参与者,它以氧化镓技术的形式出现。根据布法罗大学(UB)工程与应用科学学院电气工程副教授Uttam Singisetti博士的说法,这种材料可以在改善电动汽车、太阳能和其他形式的可再生能源方面发挥关键作用,他说,“我们需要具有更强大和更高效的功率处理能力的电子元件。氧化镓开辟了我们用现有半导体无法实现的新可能性。”

掌握驱动算法,玩转电机驱动

电机能耗占世界能耗的一半左右,提高电机效率,符合节能减排的要求是当务之急。而电机驱动的最大难点在于成本和算法,其算法和精度及可靠性又密切相关。电机控制的核心在于它的控制算法:除了硬件之外,最重要的要求

电机设计发展趋势及创新要求

随着节能成为全球范围关注的焦点,电机设计的能效也日益成为一个引人关注的问题。电机驱动产品不断配合行业发展的趋势,帮助设计人员提升能效、降低能耗、提高可靠性、减少元件数量等等,在实现节能方面发挥着积极的

实现汽车器件0ppm目标的举措

汽车可靠性和AEC资格认证 汽车可能是我们每个人拥有的最可靠的设备之一。这可能听起来有失偏颇,并且如果您的车最近刚刚出现了故障,您也许还会很难认同这种说法。如今,说现代汽车从不发生故障不太合理,但

飞思卡尔推出汽车暖通空调参考控制解决方案

飞思卡尔半导体公司今天推出了两款汽车暖通空调(HVAC)参考控制解决方案,能够提供综合的生产就绪型软硬件支持,旨在缩短OEM厂商和一级供应商的开发周期并降低总体研发成本。 这两种参考解决方案均为多功

精彩活动