LPC产品



LPC5500 PowerQuad Demo

观看 47
上传时间 2019-01-07

LPC5500低功耗特性培训视频

观看 37
上传时间 2019-01-07



LPC4300: Inter-processor communication (Cortex-M4 to Cortex-M0)

观看 145
上传时间 2018-12-21
The NXP® LPC4300 introduces the world's first asymmetrical dual-core digital signal controller architecture, featuring the ARM® Cortex™-M4 and Cortex-M0 processors. In this video filmed at ARM TechCon 2011, NXP applications engineering manager Kenneth Dwyer introduces the concept of Inter-Processor Communication with the LPC4300 demo board.

LPC4088VideoDemo 02

观看 90
上传时间 2018-12-21

LPC1800 State Configurable Timer

观看 81
上传时间 2018-12-20
An introduction to NXP's unique configurable peripheral the State Configurable Timer which can be found on the LPC1800 microcontroller and LPC4300 digital signal controller.

LPC1800 SPI Flash Interface

观看 69
上传时间 2018-12-20
A short introduction to NXP's SPI Flash Interface on the new LPC1800 microcontroller. SPIFI allows the designer to memory map into their system low cost Quad SPI Flash parts providing a simple and inexpensive way to add large amounts of flash.

LPC1500 Motor Control Solution Overview

观看 88
上传时间 2018-12-19
Simplify your motion control designs with NXP's LPC1500 microcontrollers. This video is an overview of our solution to aid in the development of motor control applications in a fast, easy, and flexible kit.

LPC1500 Motor Control Embedded World 2014

观看 73
上传时间 2018-12-19
NXP® LPC1500 enables simultaneous control of two motors with a flexible, efficient design process. Press Release: http://www.nxp.com/news/press-releases/2014/02/new-lpc-microcontroller-streamlines-motor-control.html NXP Semiconductors announced the release of the LPC1500 microcontroller series, optimized for fast, easy, and high-precision motor control. The new microcontrollers incorporate all the features required for high-accuracy sensored and sensorless motor control, enabling simultaneous control of two motors in highly flexible configurations. With ultra-efficient motor control firmware, easy-to-use GUI-based tuning tools, and two new motor control solution kits, NXP LPC1500 microcontrollers simplify evaluation and development of motor control applications, without requiring deep motor control experience.

LPC1200 Series for Industrial Control

观看 88
上传时间 2018-12-18
NXP® eLearning content

LPC11U60 MCU Overview

观看 79
上传时间 2018-12-18
This video is an overview of the new LPC11U600 microcontroller series from NXP®. The enhanced features in the LPC11U6x enables its use in a wider range of applications including consumer, commercial and industrial, wired and wireless routing, handheld medical equipment, PC/gaming accessories, and more. The LPC11U6x extends the memory options of the LPC11Uxx family by doubling flash to 256 KB and tripling SRAM to 36 KB. The LPC11U6x includes a USB device controller certified by the USB-IF. With embedded USB drivers in ROM and on-chip PHY, the LPC11U6x helps to reduce design time and cost as well as application program footprint.

LPC11U00: Cortex-M0 with USB

观看 80
上传时间 2018-12-17
NXP® Semiconductors' Tony Xia provides an overview of the LPC11U00 family of ARM Cortex-M0 microcontrollers with USB -- including detailed look at the LPC11U10, LPC11U20 and LPC11U30 series.

LPC1100XL: Extra-low-power Cortex-M0 MCU from NXP® (PowerScale D

观看 64
上传时间 2018-12-17
Based on the ARM Cortex-M0 processor, NXP's LPC1100XL family of microcontrollers features the lowest active power consumption in the industry at 110 µA/MHz and reduced deep sleep current below 2 µA. In this demo at Design West 2012, Amit Bhojraj of NXP Semiconductors discusses key features of the LPC1100XL and shows power consumption levels using the PowerScale tool from Hitex.

LPC1100 Design Challenge Winner

观看 100
上传时间 2018-12-13
Congratulations to the NXP® LPC1100 Design Challenge Winner: Low Power Low Weight Variometer by David Termohlen Featured Videos

LPC1000 debug tools, tips, and tricks (part 2)

观看 92
上传时间 2018-12-13
This module provides an introduction to Code Read Protection (CRP). It covers how to enable CRP, as well as the various CRP levels that can be set. It covers some of the potential pitfalls users can encounter (if they are not aware of CRP), and explains how these can be prevented by deliberately controlling the tool chain's linker. Examples are given for IAR, KEIL, and LPCXpresso (prior to version 3.5.6 which includes native support for CRP). This module is largely indpendent of the LPC1000 Debug Tools, Tips, and Tricks (Part 1) training module, although you may wish to view that module first as it covers ISP and Valid User Code.

LPC1000 debug tools, tips, and tricks (part 1)

观看 95
上传时间 2018-12-11
This module covers ISP and Valid User Code for the LPC11xx (Cortex-M0) and LPC13xx (Cortex-M3) part families. While not explicitly discussed, the majority of this material is applicable for LPC17xx (Cortex-M3) devices as well. ISP is supported in several flavors: A low level serial interface, GUI automation of this serial interface via Flash Magic, and on the USB enabled LPC13xx devices as a mass storage device. To supplement the use of ISP, the criteria for validation User Code by the on chip boot loader is discussed, and examples for all major development tools are covered. Following this module, you may wish to view the LPC1000 Debug Tools, Tips, and Tricks (Part 2) which goes into detail about Code Read Protection (CRP).

LPC Tips & Tricks: LPCScrypt

观看 76
上传时间 2018-12-11
NXP® offers LPCScrypt, a command-line based, fast flash, EEPROM, OTP and security programming tool, for the LPC1800 and LPC4300 series of ...

LPC-Link 2 Debugger

观看 88
上传时间 2018-12-10
This video describes the LPC-Link 2 in a short how-to-video.

LPC-Link 2 Debug Adapter Extends LPCXpresso Ecosystem

观看 79
上传时间 2018-12-10
At DESIGN West 2013, NXP® is introducing LPC-Link 2 -- the first standalone debug adapter of its kind, which can link a variety of popular IDEs (integrated development environments) to any microcontroller development board. The LPCXpresso-IDE, developed by Code Red Technologies, works out of the box with LPC-Link 2. In addition, several firmware images are available for LPC-Link 2 which make it compatible with other tools, including the popular SEGGER J-Link and the CMSIS-DAP debugger designed by ARM.